Archive for February, 2019

The demand for air conditioning has been growing a lot

Saturday, February 2nd, 2019

The demand for people who understand the subject well has increased too. This already shows that the air conditioning branch can bring a lot of money in the future, but unfortunately no one will believe you know how to actually install, you need a course, a certificate, to prove your understanding in the subject. This, for a long time was a problem, because the lack of time is great and only increases. But thinking about it some teachers will gather to take an air conditioning course online and remedy this problem. In order to know more about Air conditioning installation Geelong, one can always take the help of the internet. Now comes one of the most important moments of the process connecting the gas pipes to the indoor unit outputs.

Let the outer units be in the supports and keep them fixed

Soon after the units are secured to the outdoor unit, we need to mount a drain for the water flow in the outdoor unit. Now that the whole outside is ready and connected to both the pipes and the electric power, we need to connect the outdoor unit to the indoor unit, the first step is to unscrew the end caps of the appliance tubes and the gas outlets. Once all this is ready we need to remove the lock nut by releasing the upper valve, pressing very fast four times, these movements allowed tubes to be fixed in the correct places they should. Loosen the screws of the electrical unit by connecting the wires to the terminals with the corresponding colors as soon as you finish wrapping the wires and tubes in thermal tape. Now the step is to fill the entire hole between the wires with the mass and make the fixation on the cover. At the end of the last step, it is necessary to check that everything is installed in the correct way or in the correct and safe way, check for leaks, make some soap and place them on the valves to make sure there are no leaks. In the process of how to install the air conditioner, if there is a leak the soap bubbles that have been placed on the valves will reveal, soon after this check turn on the unit.

Turn on the remote control and start enjoying a job well done

It is very important that you remember to check if the drain was well installed, this is because your outlet may end up dripping or accumulating in places where it cannot exist, so it is necessary that the place is well protected where the installation is being done of air conditioning. Not least important is always to follow good tips on how to clean Split Air Conditioning, so that your equipment has an even longer life and a longer time. This tutorial is just a simple way to install and below I will leave a method for those who want to make a living installing air conditioning.

The rigor required during maintenance of the Lawn

Friday, February 1st, 2019

Getting and keeping a beautiful green grass lawn requires a little rigor and maintenance. Here is a presentation of the different stages of maintenance to obtain an aesthetic turf, dense and healthy. Weeding, fertilizing, and liming our tips for green grass! In order to know more about home lawn care, you must always seek help from internet.

The ground preparation is done in 5 steps

  • weeding by focusing on manual or biological techniques and avoiding chemicals
  • to make contributions in soil
  • fertilize
  • plow or digging
  • rake

Steps to maintain the lawn

Once prepared and sown, the land is ready to receive the seeds of grasses. To obtain and keep a beautiful lawn, it is necessary to maintain it all year round. Here are the five essential steps in turf maintenance.

Scarification

 Scarification is an important step for turf maintenance. It removes the thick, opaque and impervious felting that forms on the green expanse and robs the grasses of light, possible nutrients and rain.

In addition, mosses and fungi can grow and cause disease

Plant growth is greatly slowed down and grass becomes yellow. It is therefore important to scarify the grass to remedy these problems and restart the development of grasses. Scarification must be undertaken twice a year  once in the spring, after the last frosts, and once in the fall , before the first frosts.

Scarification methods

 There are 3 methods of scarification. Manual scarifier, the grass scarification is done with a simple scarifier or on wheels.Electric scarifier, scarification is done with a tool close to a traditional lawnmower but equipped with knives, a comb or claws instead of a blade.As a scarifier, the scarifier used is similar to the previous one, but it runs on gasoline because it is intended for larger areas.

Liming

 After autumn scarification, it is necessary to undertake liming work. Liming can be used to correct a pH of the soil that is too acidic by making a calcium modification made of lime. This operation favors the action of fertilizers and the development of microorganisms, helps rooting of grasses and limits the appearance of spontaneous grasses.

Fertilizer inputs

 To keep the turf in good shape and quality, the fertilizer input must be regular. It is important to ensure that the chosen turf fertilizer meets specific needs that vary with the seasons. In the spring, choose a fertilizer rich in nitrogen to help the grass to resume growth in the fall , choose a fertilizer rich in phosphorus and potassiumonce a season, except July and August , apply a slowacting fertilizer that releases the necessary nutrients to the grass as needed.

Watering the lawn

Manual watering, it is
done using a watering can or a garden hose.Watering irrigation,
it requires the development of a network of pipes connected to a water inlet
and buried before cultivation.Sprinkler watering, it requires the installation
of guns and turnstiles connected to the water network.